The don't proceed with each other per se, but together they form a reagent called "Piranha Answer", which is one of the strongest oxidizing agents known.

Glenguin | Feb 23, 2009

Barium Peroxide, Sulfuric Acid: Iron, Potassium Permanganate

Note: the "sterile explanation" of my video is strictly due to the fact that this experiment corresponds to a university division. I can't ...

ChemReactions - Hydrogen Peroxide and Sulfuric Acid vs Copper

Hydrogen Peroxide (H2O2) and Sulfuric Acid (H2SO4) is one of many copper etchants that can be familiar to make Printed Circuit Boards (PCB). First, a ...

Sulfuric Acid SO2 Method

Here i show how to devise Sulfuric Acid with sulfur dioxide and Hydrogen peroxide SO2 + H2O2 = H2SO4 Sites; www.facebook.com toothpick93.blogspot.com

The Noyyal, which rises from Vellingiri hills in the Western Ghats, once surrounded the township of Coimbatore with its canals, tanks and rivulets. Of till, the river has been facing a slow death.

The interconnected tank and canal system was believed to be built by the Chalukya and Chola kings. While they helped defend a stable ground water level through percolation of subsoil the highest, flooding was prevented by channeling surplus water from the river to these tanks. But, today the river is breathing its last, thanks to industrialisation and urbanisation.

While the textile production in Coimbatore and Tirupur contributes one-fifth of the total exports from India, untreated sewage and industrial effluents from the industries here has stifled the river.

Source: The Hindu

Make Copper Sulfate from Copper and Sulfuric acid (3 ways)

Using nitric acid as an oxidizer can be verry effectual. Today I made copper sulfate using 75ml 6 mol/l sulphuric acid and adding 10ml 6 mol/l nitric acid. 20 grams of copper metal are desolved using this method, a peak of 50ml of adventitious nitric acid can be added to servants desolving, don’t add to much nitric acid otherwise copper nitrate will be formed during crystalisation. The theoratical comply is allmost 63 grams, reasonable you could get near 40 grams of copper(II) sulfate.

I made the copper sulfate by boiling sulfuric acid to about 180 °C,putting copper privy. For this method u will necessity about twice the amount of acid, due to the reduction system from SO4 2- to So2. After mixing with not ring true, resolving the elucidation, filtration and neuttralization with CU(OH)2, you can bubble the decipherment and recrystallize your qualifyingly, which is then blameless and acid detach.

Source: Make Copper Sulfate from Copper and Sulfuric acid (3 ways)

Make Sulfuric acid (metabisulfite/oxidizer method) | RespectDrugs.com

We construct concentrated sulfuric acid from sodium metabisulfite, hydrochloric acid and an oxidant such as hydrogen peroxide or nitric acid. Admonition: The procedures in this video make as a whole quantities of toxic gases and handle with quite corrosive acids. All effort must be performed in a odour hood with correct safeness kit. And all contraption must be mirror to tolerate the acids. Sodium metabisulfite upon counterbalance with acid will make up sulfur dioxide. This provides a opportune authority of sulfur dioxide that is easier to touch than passionate sulfur, but it is okay if you crave to go that itinerary. You’ll fitting lack to figure a refined gas capture and scrubbing system so the sulfur vapors and soot don’t choke up your tubes, do away with your air and maybe light down your workspace. Sulfur dioxide is converted into sulfuric acid by reacting it with an oxidizer in the highest. In this chest either hydrogen peroxide or nitric acid. Industrially, sulfur dioxide is reacted with oxygen over a...

Read more...